– 6 –
3) Connect 14P code
4
comng
from the machne head to con-
nector
5
(CN36).
When the optional AK device
s attached, connect 2P con-
nector
6
coming from the AK
devce to connector
7
(CN37).
Insert connector
8
comng
from the detector nto connec-
tor
9
(CN33).
Connect 9P connector
!0
com-
ng from the motor to connector
!1
(CN30) on the circuit board.
Proceed to step 5).
(Caution) When using the AK device, set whether to use the AK device after confirming how to select the
auto-lifter function. (refter to
-11. Setting of the auto lifter function” p. 48.
)
2) Loosen screw
B
n cover
3
wth a screwdrver to
open the cover.
For the drect-motor type machne head, proceed
to step 4).
4
8
6
3
B
9
!0
!1
1
A
2
5
7
1) Pass cords
1
of the thread trmmer solenod,
reverse feed solenod and detector cords
2
through table hole
A
and route them under the
table. (Detector cord
2
s not provded for the
drect-motor type machne head.)
[For the direct-motor type machine head]
4)
Connect 14P cord
4
comng
from the machne head to con-
nector
5
(CN36). Connect 2P
connector
6
to connector
7
(CN37).
Connect 9P connector
!0
comng from the motor to con-
nector
!1
(CN30) on the circuit
board.
Proceed to step 5).
4
6
!0
!1
5
7
[For the belt-drive type machine head]
