– 21 –
ENGLISH
8
Adjustment of the quantity of light of LED lamp (
)
Used to adjust the quantity of light of LED lamp (optional)
Settng range : 0 to 100%
9
Optcal sensor functon ( )
: Optcal sensor functon s dsabled.
: After the optcal sensor nput, the sewng machne s stopped after the sewng of the number
of sttches set wth
!2
( ).
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
!0
Optical sensor filter function (
)
:
Optical sensor filter function is disabled.
: After the optcal sensor detecton, the nput s delayed untl the sewng machne has complet-
ed the sewng of the number of sttches set wth
!1
( ).
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
!1
Number of stitches for the optical sensor filter (
)
Used to set the number of sttches for delayng the tme at whch the optcal sensor nput status takes effect.
Settng range: 0 to 99 sttches
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
!2
Number of sttches to stop the optcal sensor ( )
Used to set the number of sttches to be sewn from the optcal sensor nput to the stop of the sewng machne.
Settng range: 0 to 99 sttches
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
(Caution) If a small number is set, the sewing machine may not be stopped within the set number of
stitches depending on the number of revolutions of the sewing machine.
!3
Number of tmes of optcal sensor detecton ( )
The sewng machne stops every tme the optcal sensor nput s turned ON and carres out automatc
thread trmmng when the set number of tmes s reached.
Settng range: 1 to 15 tmes
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
!4
Pedal depressng speed lmtng functon ( )
Ths functon lmts the pedal depressng speed at the tme of the optcal sensor nput.
0 : The functon s dsabled.
1 : Fixed at the one-shot speed (function setting No. 38)
2 : Lmted to the one-shot speed (functon settng No. 38)
3 : When the optical sensor is enabled, the sewing machine runs under the automatic mode upon de
-
press on the pedal.
* Ths functon s enabled when the optcal sensor s set wth functon settng No. 12.
