– 44 –
#7
Selection of alternate up/down initial output (function setting No. 147)
Alternate up/down output s forcbly turned ON or OFF when the power s turned ON.
When this function is set to disable, the alternate up/down output is restored to the state in which the func
-
ton has been set before the last turn-OFF of the power.
When the set value is "1," the alternate up/down output is brought into the OFF state. When the set value
s "2," the output s brought nto the ON state.
0 : Disabled
1 : OFF
2 : ON
#8
2-pitch output during reverse feed stitching at the beginning/end of sewing (function setting No. 148)
2-ptch output s set n the ON state durng control of reverse feed sttchng at the begnnng/end of sewng.
0 : The functon s n the OFF state
1 : The functon s n the ON state
#9
2-pitch output inversion during alternate up/down output (function setting No. 149)
The 2-ptch output status s output wth nverted n synchronsm wth the alternate up/down output.
2-ptch output s changed over to "OFF" f t s set n the ON state or to "ON" f t s set n the OFF state
when changng over the alternate up/down output.
0: The functon s n the OFF state
1: The functon s n the ON state
$0
2-pitch initial output selection (function setting No. 150)
2-ptch output s forcbly turned ON or OFF when the power s turned ON.
When this function is set to disable, the 2-pitch output is restored to the state in which the function has
been set before the last turn-OFF of the power.
When the set value is "1," the alternate up/down output is brought into the OFF state. When the set value
s "2," the output s brought nto the ON state.
0 : Disabled
1 : OFF
2 : ON
4
1
7
0
4
1
8
0
4
1
9
0
5
1
0
0
$1
Pause and stitch alignment function (function setting No. 151)
When the reverse feed stitching/multi-layer stitching is specified, the sewing machine temporarily stops at
every corner of the sewng pattern at the begnnng and end of sewng and durng overlapped sttchng.
(Caution) When this function is brought into oN state, functions setting numbers 51 to 53 are disabled.
0 : The functon s n the OFF state
1 : The functon s n the ON state
$2
Condensation stitching function for beginning/end of sewing (function setting No. 154)
In the case of the sewng machne head provded wth the condensaton sttchng functon, the sewng ma-
chne performs condensaton sttchng nstead of automatc reverse feed sttchng.
Ths functon should be used when you do not want to carry out reverse feed sttchng but want to prevent
thread from slppng off the materal at the begnnng and end of sewng.
0 : The functon s n the OFF state
1 : The functon s n the ON state
$3
Needle thread grasping function (function setting No. 156)
Selecton between enable/dsable of the needle thread graspng functon
0 : Enable/disable is changed over with the operation enabling switch
1 : The functon s dsabled
2 : The functon s enabled.
5
1
1
0
5
1
4
0
5
1
6
0
temporarily
stops at these
points.
