−
73
−
READY RESET CLAMP WINDER THREAD
8. TEST MODE
(1) How to use the test mode
Input check of the various sensors can be performed.
1) Pressing [Right
] key
1
, turn ON the power.
2) Select the sensor No. you desire to make sure with [Left
] or [Left
] key
2
. (No. 1 to 3)
No. 1 : Feed origin sensor, stitch base line sensor, stitch width origin sensor, and not used
No. 2 : Thread breakage detection, needle-up position detection sensor, knife return sensor, and presser fall
sensor
No. 3 : Not used, safety switch, start switch and presser switch
If you turn the sensor ON - OFF, the value will change 1/0.
Display when the sensor is ON :
(Feed origin sensor, stitch base line sensor, stitch width sensor and not used)
(Thread breakage detection, needle-up position detection sensor, knife return sensor, and presser fall sensor)
(Not used, safety switch, start switch, and presser switch)
1
0
1
1
–
2
0
0
1
0
3
–
1
0
0
1
2
Summary of Contents for LBH-1700
Page 1: ...R ENGINEER S MANUAL 29339504 No 04 Electronic Buttonholing Machine LBH 1700 Series ...
Page 55: ... 51 MEMO ...
Page 124: ... 120 ...
