−
68
−
15) Basting function (Memory switch Nos. 35 and 36)
This switch sets the pitch and number of revolution when performing basting in advance before
performing overedging.
No. 35 : Bast ring pitch
Pitch at the time of basting is set.
No. 36 : Speed at the time of basting
Limitation of number of revolution when performing basting is set.
* Number of revolution may be lower than that which has been set in accordance with the pitch.
16) Changeover of mm/inch indication function (Memory switch No. 40)
Unit displayed on the panel can be changed.
0 : Indication of mm
1 : Indication of inch
Indication of inch is that of decimal points.
17) Origin retrieval function (Memory switch No. 41)
This switch is set when performing the origin retrieval at the time of completion of sewing.
0 : Origin retrieval is not performed.
1 : Origin retrieval is performed at the time of completion of sewing.
2. For cycle-sewing, origin retrieval is performed every time 1-cycle is completed.
18) Sewing start position setting function (Memory switch No. 42)
This switch sets the position of feed direction at the sewing start.
Error 18 will appear when the sewing start position is larger than (2nd bar-tacking length - 0.1 mm).
* When changing the sewing start position, make sure of the adjustment of needle thread trimmer
and bobbin thread trimmer.
3
5
4
3
6
2
0
0
0
4
0
0
4
1
0
4
2
0.
5
0
Sewing start position
Feed amount retreat position
is the set value “0”.
Summary of Contents for LBH-1700
Page 1: ...R ENGINEER S MANUAL 29339504 No 04 Electronic Buttonholing Machine LBH 1700 Series ...
Page 55: ... 51 MEMO ...
Page 124: ... 120 ...
