JUKI LBH-1700, Engineer'S Manual

Page: 60 / 126

−
56
−
Supplementary explanation to the sewing data list
(1) Tie stitching
Tie stitching can be set to each pattern to protect the thread from slip-off of needle thread at the start of sewing,
thread breakage, fray at the end of sewing, etc. in accordance with the sewing conditions.
1) Start of sewing
2) End of sewing
Tie stitching can be performed at the position of the start
of sewing (memory switch No. 42).
Tie stitching can be performed at the position of the start
of sewing (memory switch No. 42).
• Width of tie stitching at the start of sewing → automatic setting by stitch width
• Number of stitches at the start of sewing → number of stitches can be set by data No. 26.
Increase the number of stitches when slip-
off of needle thread occurs.
• Pitch at the start of sewing → it is effective to slighly enter the feed by data No. 27 when
needle thread breaks at the start of sewing.
• Setting of the feed direction cannot be performed.
• When thread frays or needle thread appears above, perform setting in
accordance with the sewing conditions referring to the above table.
Needle thread appears above.
Increase width.
Decrease number of stitches.
Data No. 23 Width of tie
stitching
Data No. 24 Number of
stitches of tie stitching at
sewing end
Thread frays.
Decrease width.
Increase number
of stitches.