manualshive.com logo in svg

JUKI LBH-1700, Engineer'S Manual

The JUKI LBH-1700 is a high-performance sewing machine designed for professional use. It comes with a comprehensive Instruction Manual that can be easily downloaded for free from manualshive.com, ensuring that users have all the necessary information to make the most of this exceptional product.

Share
Download
background image

CONTENTS

1. SPECIFICATIONS ............................................................................................. 1

2. STANDARD ADJUSTMENT ............................................................................. 2

(1) Height of the needle bar ................................................................................................. 2
(2) Needle-to-hook timing .................................................................................................... 2
(3) Needle rocking timing..................................................................................................... 4
(4) Height of the needle bar rocking rod (adjusting the reference of needle bar
      rocking components)...................................................................................................... 4
(5) Adjusting the stitch width PM arm and backlashes of the stitch base line
      and stitch width gears .................................................................................................... 6
(6) Detecting the origin of the stitch base line stepping motor ....................................... 6
(7) Detecting the origin of the stitch width stepping motor ............................................. 8
(8) Backlash of the feed gear............................................................................................... 8
(9) Longitudinal position of the presser and the feed shaft ........................................... 10
(10) Knife drop position ...................................................................................................... 10
(11) Knife bar/position of the knife installing base/knife bar stroke .............................. 12
(12) Knife detector sensor .................................................................................................. 14
(13) Position of the starting safety arm............................................................................. 16
(14) Adjusting the starting safety hook............................................................................. 16
(15) Adjusting the starting sensor ..................................................................................... 18
(16) Adjusting the needle thread trimmer control lever .................................................. 20
(17) Adjusting the stop-motion solenoid .......................................................................... 20
(18) Stroke of the stop-motion solenoid ........................................................................... 22
(19) Longitudinal amount of the needle thread trimmer.................................................. 22
(20) Lateral position of the needle thread trimmer .......................................................... 24
(21) Height of the needle thread trimmer .......................................................................... 24
(22) Position of winding the needle thread at the start of sewing .................................. 26
(23) Opening timing of the needle thread trimmer ........................................................... 26
(24) Spring pressure of the needle thread trimmer.......................................................... 28
(25) Adjusting the needle thread trimmer lever................................................................ 28
(26) Position of the bobbin thread trimmer/position of bobbin thread clamp plate ..... 30
(27) Timing to open the bobbin thread trimmer and the opening amount / adjusting
       the bobbin winder trip latch ........................................................................................ 30
(28) Height of the presser ................................................................................................... 32
(29) Adjusting the thread tension solenoid ...................................................................... 32
(30) Adjusting the safety switch ........................................................................................ 34
(31) Adjusting the bobbin winder ...................................................................................... 34
(32) Adjusting the thread breakage detecting plate......................................................... 36
(33) Adjusting the presser lifting solenoid ....................................................................... 36
(34) Adjusting the presser lifting air cylinder ................................................................... 38
(35) Adjusting the presser fall detecting plate ................................................................. 38

3. DISASSEMBLING/ASSEMBLING PROCEDURE .......................................... 40

(1) Disassembling/assembling the hook driving shaft .................................................... 40
(2) Disassembling/assembling the main shaft ................................................................. 42
(3) Adjusting the timing belt tension ................................................................................. 44

Summary of Contents for LBH-1700































































































































Reviews:

No comments

Related manuals for LBH-1700

Happy HCD How To Install preview
HCD
Brand: Happy Pages: 9
Safex INSIDE-FOG FLUID Operating Instructions Manual preview
INSIDE-FOG FLUID
Brand: Safex Pages: 8
Adjustoform Sew Simple Assembly And Adjustment Instructions preview
Sew Simple
Brand: Adjustoform Pages: 2
Nobles 1002556 - 1020 Power Eagle Operator And Parts Manual preview
1002556 - 1020 Power Eagle
Brand: Nobles Pages: 55
Magnum MC-35M Product Instruction Manual preview
MC-35M
Brand: Magnum Pages: 11
Singer 831U Service Manual preview
831U
Brand: Singer Pages: 46
Singer 147-2 Parts List preview
147-2
Brand: Singer Pages: 30
Nilfisk-ALTO Scrubtec 770 L Operator'S Manual preview
Scrubtec 770 L
Brand: Nilfisk-ALTO Pages: 64
IPC Soteco ALFA 650 User And Maintenance Handbook preview
ALFA 650
Brand: IPC Soteco Pages: 40
T-COM T-Fax 2420 Quick Reference Manual preview
T-Fax 2420
Brand: T-COM Pages: 6
Necci Lock 160 Instruction Book preview
Lock 160
Brand: Necci Pages: 39
Sirclecorp SircleBind CC-320 Instruction Manual preview
SircleBind CC-320
Brand: Sirclecorp Pages: 6
Kärcher 1.259-005 Instruction Manual preview
1.259-005
Brand: Kärcher Pages: 261
Oki OF4580 User Manual preview
OF4580
Brand: Oki Pages: 91
JUKI APW-896/IP-420 Instruction Manual preview
APW-896/IP-420
Brand: JUKI Pages: 140
Panasonic KX-FHD331 Service Manual preview
KX-FHD331
Brand: Panasonic Pages: 35
Panasonic KX-FHD301 Service Manual preview
KX-FHD301
Brand: Panasonic Pages: 50
Panasonic KX-FHD301 Operating Instructions Manual preview
KX-FHD301
Brand: Panasonic Pages: 76

Brands by name

Popular brands

Load more brands