JUKI LBH-1700, Engineer'S Manual

Page: 57 / 126

−
53
−
No
1
2
3
4
5
6
7
8
9
!0
!1
!2
!3
N A M E
Sewing LED
Ready key
Reset key
Clamp (presser)
key
Winder key
Threading key
Display LED 2 digits
“–” key, left
“+” key, left
Display LED 4 digits
“–” key, right
“+” key, right
Pattern No. key
D E S C R I P T I O N
This LED lights up when the sewing
machine can be operated.
Every time this key is pressed, change-
over of setting
←→
set ready can be
performed.
Release of error
(when various errors occur.)
The feed mechanism travels to its initial
position (at the time of temporary stop)
Counter reset (when counter is selected
and the feed mechanism stays at its initial
position.)
Every time this key is pressed, change-
o v e r o f p r e s s e r u p
←→ d o w n i s
performed.
(When auto-lifter device is used and the
feed mechanism stays at its initial
position.)
Release solenoid ON (when foot pedal
type 2-step pedal is used.)
Release of temporary stop
(at the time of temporary stop)
Every time this key is pressed, change-
over of setting
←→ bobbin winding mode
is performed.
Every time this key is pressed, moving
to right end of needle bar
←→ moving to
sewing position of needle bar is
performed.
(When sewing LED lights up.)
This key displays pattern No., data No.,
etc.
This key subtracts pattern No., data No.,
etc.
This key adds pattern No., data No., etc.
This key displays various data, speed,
counter value, etc.
This key subtracts various data.
This key adds various data.
This key selects pattern No. display.
No
!4
!5
!6
!7
!8
!9
@0
@1
@2
@3
@4
@5
@6
D E S C R I P T I O N
This key selects data display.
This key selects counter display.
This key selects thread tension setting
at parallel section display.
This key selects thread tension setting
at bar-tacking section display.
This key selects data of various sections
display (when sewing LED goes off.).
Overedge width, pitch at parallel section,
left/right compensation of bar-tacking
width, left/right compensation of knife
groove width, clearance, cloth cutting
length
This key selects sewing shape
(when sewing LED goes off.).
Every time this key is pressed, change-
over of 1-ply
←→ 2-ply stitching is
performed.
(When sewing LED goes off.)
Every time this key is pressed, change-
over of drop
←→ not drop is performed.
Data No. optional function key (initial
value : No. 13 basting)
Data No. which has been set by the
memory switch is displayed.
This key selects presser type
(when sewing LED goes off.).
1, 2, and 3 types
This key makes the feed mechanism
travel forward stitch by stitch.
This key makes the feed mechanism
travel backward stitch by stitch.
Speed increases when this is lifted
upward and decreases when this is
lowered downward.
N A M E
Data key
Counter key
Thread tension key,
left
Thread tension key,
right
Data of each
section selection
key
Sewing shape
selection key
1/2 stitching
selection key
Knife cancel key
Function key
Presser selection
key
Forward key
Backward key
Speed variable
resistor
Round
shape Square
shape Radial
square
shape