– 62 –
(2) Point move (071 and 075)
This function moves the specified needle entry point. There are two methods of RELATIVE POINT
MOVE
and ABSOLUTE POINT MOVE
dependng on movng of the pattern data
after the moved pont.
The pont move can move not only the pattern data created wth the pont sewng nput, but also the
data nputted wth any functon such as lnear sewng or the lke. In case of the lnear sewng or the lke,
when the pont move s executed, t s changed to the pont sewng.
1
Select the relative point move.
Select and execute RELATIVE POINT MOVE (functon code
071)
n the code lst screen.
2
Specify the relative point move position.
Specfy the move poston of the pont usng MOVE key
B
, and press ENTER button
C
. Then the
point change confirmation screen id displayed.
3
Confirm the point change.
The point change confirmation screen shows that the point
change may be changed to the pont sewng. In case of
contnung, press ENTER button
A
, and the pont move
s executed. Then the screen returns to the standard screen.
A
C
B
