– 50 –
The ntermedate presser heght s set. Ths value s effectve up to the poston where the next
ntermedate presser heght settng command exsts.
(13) Intermediate presser height setting (018)
1
Select the intermediate presser height setting.
When selectng and executng INTERMEDIATE PRESSER
HEIGHT SETTING (function code 018)
n the code
lst screen, the left-hand screen s dsplayed.
2
Perform setting of the intermediate presser height.
Set the value of thread tenson wth TEN key
to
A
, and + or - button
B
n the left-hand screen and
press ENTER button
C
. Then the value of the set thread
tenson s nputted, and the screen returns to the standard
screen.
When + or - button
B
s pressed wth the ntermedate presser
lowered, the ntermedate presser nterlocks and becomes the nputted heght.
The value whch s really nputted as the command s :
Intermedate presser heght settng (No. 018) =
Intermedate presser heght reference value (No. 115) +
value to be nputted to the data (ncrease/decrease value)
C
A
B
1. When "1.0 mm" is set with intermediate
presser height reference value (No. 115) and
"3.0 mm" is set with intermediate presser
height setting (No. 018), the value to be
inputted to the data (increase/decrease value)
becomes "2.0 mm".
2. Input can be performed up to 7 mm. However,
the actual operation is limited by the setting
of the sewing machine.
