– 34 –
This is an input function to create the needle entry point which is separated an optional fixed distance
n terms of the nput reference lne. It s convenent when nputtng the needle entry pont takng the
perphery of small thng as the reference when attachng the small thngs or the lke.
There are 4 knds of the offset sewngs below.
• Lnear offset sewng (functon code 034)
• Splne offset sewng (functon code 035)
• Arc offset sewng (functon code 036)
• Crcle offset sewng (functon code 037)
4-3. Offset sewing (034 to 037)
1
Display the linear offset sewing setting screen.
When selectng and executng LINEAR OFFSET SEWING
(functon code 034)
n the code lst screen, the lnear
offset sewng settng screen s dsplayed.
2
Perform setting of the linear offset sewing.
The set value of present stitch length is displayed at STITCH
LENGTH INPUT button
A
, the set value of present offset
width is displayed at OFFSET WIDTH INPUT button
B
,
and the set value of present sewng speed s dsplayed at SEWING
SPEED INPUT button
C
n the lnear offset sewng
screen.
When the button of the tem you desre to change s pressed,
the set value s dsplayed n the nput screen. Settng
procedure of the respectve tems n the nput screen s the
same as that of the lnear ordnary sewng.
Creation direction of the offset sewing can be specified with
CREATION DIRECTION buttons
D
and
E
. Button
or
whch s changed n color s the creaton drecton
whch s selected now.
When CREATION DIRECTION, LEFT button
D
s pressed,
the offset sewng s created on the left sde n terms of the
progressing direction and when CREATION DIRECTION, RIGHT
button
E
s pressed, the offset sewng s created on the rght
sde n terms of the progressng drecton.
After settng, or when t s not necessary to change, press ENTER
button
F
, and the coordnate nput screen s dsplayed.
D
C
E
F
B
A
