– 28 –
3
Move the needle position.
Press MOVE key
D
n the coordnate nput screen,
and the needle position moves in the specified direction.
4
Input the coordinate.
When the needle has moved to the specified position, press
DECIDING POINT button
E
, and the poston s nputted
as the shape pont (passng pont).
Repeat the operaton of the steps of
3
and
4
to nput two
ponts. Two nput ponts are necessary as the number of nput
ponts. Also, t s not possble to nput more than 3 ponts.
5
End setting of the arc ordinary sewing.
When ENTER button
F
s pressed, the set data s
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
(4) Arc ordinary sewing (025)
When two points are specified, the arc connecting the points and the needle position is inputted as
the specified stitch length. Sewing direction is in the order of the specified points, and either clockwise
drecton or counterclockwse one can be nputted.
1
Display the arc ordinary sewing setting screen.
When selectng and executng ARC ORDINARY SEWING
(functon code 025)
n the code lst screen, the arc
ordnary sewng settng screen s dsplayed.
2
Perform setting of the arc ordinary sewing.
The set value of present stitch length is displayed at STITCH
LENGTH INPUT button
A
, and the set value of
present sewng speed s dsplayed at SEWING SPEED INPUT
button
B
n the arc ordnary sewng settng screen.
When the button of the tem you desre to change s pressed,
the nput screen of the set value s dsplayed. Settng
procedure of sttch length and sewng speed s the same as
that of the lnear ordnary sewng.
After settng or when t s not necessary to change, press
ENTER button
C
, and the coordnate nput screen s
dsplayed.
C
B
A
E
D
F
