– 32 –
1
Display the linear zigzag sewing setting screen.
When LINEAR ZIGZAG SEWING (functon code 030)
s selected and executed n the code lst screen, the
lnear zgzag sewng settng screen s dsplayed.
2
Perform setting of the linear zigzag sewing.
The set value of present zigzag pitch is displayed at ZIGZAG PITCH
INPUT button
A
, the set value of present zgzag wdth s
displayed at ZIGZAG WIDTH INPUT button
B
, and the
set value of present sewng speed s dsplayed at SEWING SPEED
INPUT button
C
n the lnear zgzag sewng settng
screen.
When the button of the tem you desre to change s pressed, the
nput screen of the set value s dsplayed. Settng procedure n the
nput screen of each tem s the same as that of the lnear ordnary
sewng.
The starting direction of zigzag sewing can be specified with
START DIRECTION buttons
D
and
E
. Button
or
whch s changed n color s the startng
drecton whch s selected now.
When START DIRECTION, LEFT button
D
s pressed,
the sewng starts from the left sde n terms of the progressng
direction, and when START DIRECTION, RIGHT button
E
s pressed, the sewng starts from the rght sde n terms of
the progressng drecton.
After settng, or when t s not necessary to change, press
ENTER button
F
, and the coordnate nput screen s
dsplayed.
Ths functon s the nput functon to create the needle entry pont of zgzag n the lateral drecton n
terms of the nput reference lne. It s convenent to perform nputtng of zgzag sewng of wappen or the
lke.
There are 4 knds of zgzag sewngs below.
• Lnear zgzag sewng (functon code 030)
• Splne zgzag sewng (functon code 031)
• Arc zgzag sewng (functon code 032)
• Crcle zgzag sewng (functon code 033)
4-2. Zigzag sewing (030 to 033)
C
D
E
F
B
A
