– 37 –
3
Move the needle position.
Press MOVE key
G
n the coordnate screen, and
the needle position moves in the specified direction.
4
Input the coordinate.
When the needle position has moved to the specified position
and DECIDING POINT button
H
s pressed, the poston
s nputted as the shape pont (passng pont).
It s possble to nput by repeatng the steps of
3
and
4
as
well.
5
End setting of the linear double orderly sewing.
When ENTER button
I
s pressed, the set data s
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
Settng procedure of the double orderly sewngs of other
shapes s the same as that of the lnear double orderly sewng.
Coordnate nputtng procedure of the respectve sewngs s
the same as that of the ordnary sewng.
In case of arc or circle, when the width is made
larger than the radius of circle, the pattern which
is against expectation is created. So, be careful.
H
G
I
