– 60 –
The pattern data of the specified section is deleted in needle entry point unit. There are two methods of
RELATIVE POINT DELETION
AND ABSOLUTE POINT DELETION
depending on
moving of the pattern data after the deleted point.
Point deletion can delete not only the pattern data which is created with point sewing input, but also the
data inputted with any function such as linear sewing or the like.
To perform the modification of the pattern, move the needle position to the modifying position using
beforehand FEED BACKWARD key
or FEED FORWARD key
in the standard screen.
5-1. Point modification
(1) Point deletion (070 and 074)
5. MODIFICATION OF THE PATTERN
1
Select the relative point deletion.
Select and execute RELATIVE POINT DELETION (function
code 070)
in the code list screen.
2
Specify the relative point deletion range.
Move the needle position and specify the section of the
deleting points by pressing FEED BACKWARD key
B
or FEED FORWARD key
C
, and press ENTER button
D
. The point change confirmation screen is displayed.
3
Confirm the point change.
The point change confirmation screen shows that the point
change may be changed to the point sewing. In case of
continuing, press ENTER button
A
, and the point
deletion confirmation screen is displayed.
A
C
B
D
