– 38 –
Difference between orderly sewing and reverse sewing
1
Display the linear double reverse sewing setting screen.
When selectng and executng LINEAR DOUBLE REVERSE
SEWING (functon code 044)
n the code lst screen,
the lnear double reverse sewng settng screen s dsplayed.
Settng procedure of the double reverse sewng s the same as
that of the double orderly sewng.
(2) Double reverse sewing (044 to 047)
Create the sewing so that the sewing composed at the input point and that of the offset figure are in the
reverse drecton.
There are 4 knds of the double reverse sewngs below.
• Lnear double reverse sewng (functon code 044)
• Splne double reverse sewng (functon code 045)
• Arc double reverse sewng (functon code 046)
• Crcle double reverse sewng (functon code 047)
1
is inputting point, and
3
is the last point.
In case of arc or circle, when the width is made
larger than the radius of circle, the pattern which
is against expectation is created. So, be careful.
Sewing in case of orderly sewing
Sewing in case of reverse sewing
2
3
1
2
3
1
