JRC JMA-5212-4, User Manual

Page: 226 / 494

3147
3.11
USING CARD
This radar has two card slots. Inserting a flash memory card (option) into a card slot, you can save the
following contents, saved in the processor, in the card or can read data from the card to the processor.
x
Trails of own ship: 7000 points maximum
x
Track of other ship: 20 target
˜
1500 points (TT or AIS option)
x
Mark Line: 20000 points maximum (plotter option)
x
Waypoint: 99 points maximum (plotter option)
x
Route: 10 routes maximum (plotter option)
These pieces of information can be saved in a flash memory card as a file. The internal capacity is as
large as only a file. An internally created file can be saved until the flash memory card is full.
٧
Recommendations on using CF cards.
ڎ
Recommended card size.
64 MB, 128 MB, 256 MB, 512 MB, 1GB.
ڎ
Recommended file system.
The Compact card should be formatted to FAT32 in Windows XP (SP2).
Many CF cards are formatted to FAT16 before shipping. Be sure to Format the CF card
to FAT32, before use.
ڎ
Recommended OS.
Windows XP (SP2).
ڎ
Operating temperature range
Depending on the CF card specification and the radar specification, -15 to +55
degree Celsius.
Caution
Compact Flash Cards can be used with this
system. The following shows
the recommendations in use. However they do
not guarantee that CF cards may properly work
with this system. Depending on the hardware or
software, the cards will not work correctly.
Any damage including loss of data caused
by using the data created on this system is out
of warranty.
Important files should be backed up therefore.