background image

1

SMP35-N/ SMP50-N 

Self-Standing Multifunctional Electric Sounder

Thank you for purchasing Qlight’s products. Please read this user manual carefully 

prior to installation and operation to ensure safe and correct use.

Precautions for Safety  

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. Please remove any objects that can interrupt ventilation around the product. 

2. Please turn off the power of the product immediately if it fails to operate properly. 

3. Carefully wire the product according to each product’s specification. 

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product. 

5. Do not apply excessive force/impact to the product. 

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

Precautions for Correct Use 

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the 
product that would void the warranty.

1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection 

    ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, 

    malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to 

    follow these instructions may lead to fire, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to 

    follow this may cause damage to property, fire, electric shock and loss of life.)

Please scan the QR code for more 

detailed product information.

www.qlight.com

• Protection rating : IP65

• Ambient operating temperature : -25°C to +50°C 

Model 

number

Voltage

Current Sound pattern and 

volume

Certificate

Weight

SMP35-N

DC12~24V

Max.0.680A

• Bit Input : 5Ch

• Binary Input : 30Ch

• Built-in sounds

 : Max.115dB

 (Based on WS-Ch6)

0.76kg

1.03kg

AC110V~220V Max.0.170A

SMP50-N

DC12~24V

Max.2.800A

• Bit Input : 5Ch

• Binary Input : 30Ch

• Built-in sounds

 : Max.123dB

 (Based on Ch4)

0.95kg

AC110V~220V Max.0.540A

1.23kg

SMP50-N -

110/220

-

LC

[Model 

number]

[Voltage]

[Sound selection]

|

|

|

• SMP35-N
• SMP50-N

• 12/24-DC12V~24V
• 110/220
  - AC110V~220V

• 

(Blank)

  -Built-in switch

• LC

  -External contact

Product Specifications

Ordering Specifications

123

50

25

65

115

HORN

Summary of Contents for SMP35-N









Reviews: