JRC JMA-5212-4 User Manual Download Page 181

Page: 181 / 494

3.9 APPLIED OPERATIONS

3102

3.9

APPLIED

OPERATIONS

3.9.1 Set Radar Signal Processing (Process Setting)

This function enables the setting of detail information about radar signal processing.

Procedure

1 Press [RADAR MENU] key twice.

Press [6] key.

The Process Setting Menu will appear.

Detail information about radar signal processing
can be set by changing the settings of the menu
items.

Note:

After the settings for radar signal processing are

changed, small targets may not be displayed or
unwanted waves may not be suppressed. Thus, do not
make a significant change in the settings.

[1] Video Latitude

Select the dynamic range in which receiving signals are to be shown on the radar display.

Select NORMAL in standard, and WIDE in rainy weather.

NARROW clearly displays short-range videos when STC is used in manual mode.

NORMAL : Standard setting

The dynamic range varies depending on the actual range:

Short range > long range

WIDE :

Use this mode when rainy weather intensifies unwanted waves.

The dynamic range is about twice as wide as when NORMAL is selected.

SUPER WIDE :

Use this mode when rain cloud remain at WIDE mode.

The dynamic range is about twice as wide as when NORMAL is selected.

NARROW : Narrows the dynamic range at short range.

Summary of Contents for JMA-5212-4













































































































































































































































































































































































































































































































Search results

Summary of Contents for JMA-5212-4

Reviews:

Related manuals for JMA-5212-4

Brands by name

Popular brands

JRC JMA-5212-4, User Manual

Search results

Summary of Contents for JMA-5212-4

Reviews:

Related manuals for JMA-5212-4

Brands by name

Popular brands