manualshive.com logo in svg

JRC JMA-5212-4, User Manual

The JRC JMA-5212-4 is a high-performance marine radar system designed for easy installation and operation. Ensure seamless setup with our comprehensive Installation manual, available for free download at manualshive.com. This manual provides detailed instructions, allowing users to confidently navigate and optimize the features of their JRC JMA-5212-4 radar system.

Share
Download
background image

- xvii - 

2.3.6 

Software Buttons for Area 6   
(Other Ship Information Area) (Right Side of the Radar Display) .... 2-16 

2.3.7 

Software Buttons for Area 7   
(Panel Display Area) (Right Side of the Radar Display) .................. 2-18 

2.3.8 

Software Buttons for Area 7   
(Panel Display Area) (Right Side of the Radar Display) .................. 2-19 

2.3.9 

Software Buttons for Area 8 (Operation and Message Area)   
(Right Side of the Radar Display).................................................... 2-20 

 
 

3. BASIC 

OPERATION 

 

3.1 FLOW 

OPERATION ................................................................................ 3-1 

3.1.1    Power ON and Start the System ......................................................... 3-2 

3.1.2  Observe and Adjust Video ................................................................... 3-3 

3.1.3  Acquire and Measure Data.................................................................. 3-4 

3.1.4  Display and Measure with Reference to CCRP................................... 3-4 

3.1.5  End the Operation and Stop the System ............................................. 3-5 

3.2 MENU 

COMPOSITION ........................................................................... 3-6 

3.2.1  Overview of Menu Structure ................................................................ 3-6 

3.2.2  Basic Menu Operation......................................................................... 3-7 

3.3 PREPARATION ....................................................................................... 3-9 

3.3.1  Adjust Display Brilliance [BRILL] ......................................................... 3-9 

3.3.2  Adjust Contrast.................................................................................... 3-9 

3.3.3  Adjust Operation Panel Brilliance [PANEL] ....................................... 3-10 

3.3.4  Switch Day/Night Mode [DAY/NIGHT]............................................... 3-10 

3.3.5    Adjust Brilliance of Information on Radar Display   

(Brilliance Setting) ........................................................................... 3-11 

3.3.6  Adjust Sound Volume (Buzzer Volume)............................................. 3-12 

3.3.7  Reset Alarm Buzzer [ALARM ACK] ................................................... 3-12 

3.3.8  Set Display Color .............................................................................. 3-13 

3.4 BASIC 

OPERATIONS ........................................................................... 3-15 

3.4.1  Start Transmission [TX/PRF] ............................................................. 3-15 

3.4.2  Stop Transmission [STBY]................................................................. 3-15 

3.4.3    Change Range (Observation Range Scale) [RANGE+/-] .................. 3-15 

3.4.4  Tune .................................................................................................. 3-16 

3.4.5  Control Sensitivity [GAIN/PL] ............................................................ 3-17 

3.4.6  Suppress Sea Clutter [AUTO-SEA] ................................................... 3-18 

3.4.7  Suppress Rain/Snow Clutter [AUTO-RAIN]....................................... 3-20 

3.4.8  Reject Radar Interference [IR]........................................................... 3-22 

3.4.9  Hide/Display Range Rings (RINGS).................................................. 3-23 

Summary of Contents for JMA-5212-4















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JMA-5212-4

Ohmart Vega VEGAPULS 67 Product Information preview
VEGAPULS 67
Brand: Ohmart Vega Pages: 28
uAvionix Ping200SR User And Installation Manual preview
Ping200SR
Brand: uAvionix Pages: 31
GME GX600A Instruction Manual preview
GX600A
Brand: GME Pages: 15
F.u.n.k.e. TRT800H-LCD Operation And Installation preview
TRT800H-LCD
Brand: F.u.n.k.e. Pages: 52
Garmin VARIA RCT716 Owner'S Manual preview
VARIA RCT716
Brand: Garmin Pages: 26
Garmin VARIA RTL510 Quick Start Manual preview
VARIA RTL510
Brand: Garmin Pages: 158
XAG RD24412 User Manual preview
RD24412
Brand: XAG Pages: 8
Radiodetection RD1000 Operation Manual preview
RD1000
Brand: Radiodetection Pages: 46
Uniden UH400SX Owner'S Manual preview
UH400SX
Brand: Uniden Pages: 36
Daikin LXE10E-A37 Service Manual And Parts List preview
LXE10E-A37
Brand: Daikin Pages: 73
Peavey PR 2652 Specification Sheet preview
PR 2652
Brand: Peavey Pages: 8
Leica Geosystems DSX User Manual preview
DSX
Brand: Leica Geosystems Pages: 58
Koden CVS-705D Installation Manual preview
CVS-705D
Brand: Koden Pages: 74
Marine Audio MA110 Operation Manual preview
MA110
Brand: Marine Audio Pages: 14
Scanjet ScanFinder-B Manual preview
ScanFinder-B
Brand: Scanjet Pages: 38
BEN Marine ANTHEA Operation And Installation Manual preview
ANTHEA
Brand: BEN Marine Pages: 102
Lowrance SonicHub 2 Installation Manual preview
SonicHub 2
Brand: Lowrance Pages: 2
Japan Radio Co. JHS-182 Service Manual preview
JHS-182
Brand: Japan Radio Co. Pages: 20

Brands by name

Popular brands

Load more brands