manualshive.com logo in svg

JRC JMA-5212-4, User Manual

The JRC JMA-5212-4 is a high-performance marine radar system designed for easy installation and operation. Ensure seamless setup with our comprehensive Installation manual, available for free download at manualshive.com. This manual provides detailed instructions, allowing users to confidently navigate and optimize the features of their JRC JMA-5212-4 radar system.

Share
Download
background image

- xxi - 

6.4 FALSE 

ECHOES ................................................................................... 6-10 

6.5 DISPLAY 

OF 

RADAR 

TRANSPONDER 

(SART)................................... 6-13 

 
 

7.  SETTINGS FOR SYSTEM OPERATION 

 

7.1 SETTINGS 

AT 

INSTALLATION ............................................................... 7-1 

7.1.1    How to open the Adjust Menu ............................................................. 7-2 

7.1.2  Tuning Adjustment............................................................................... 7-3 

7.1.3  Bearing Adjustment ............................................................................. 7-6 

7.1.4  Range Adjustment ............................................................................... 7-7 

7.1.5  Antenna Height Setting (Antenna Hight) ............................................. 7-8 

7.1.6    Setting of CCRP/Antenna/GPS Antenna Position (CCRP Setting)...... 7-9 

7.2 NAVIGATOR 

SETTING ......................................................................... 7-11 

7.2.1  Ship Heading Equipment Setting (Heading Equipment).................... 7-14 

7.2.2  NSK Unit Setting ............................................................................... 7-15 

7.2.3  True Bearing Value Setting (Set GYRO) ........................................... 7-17 

7.2.4  MAG Compass Setting...................................................................... 7-18 

7.2.5  Ship Speed Equipment Setting (Speed Equipment) .......................... 7-19 

7.2.6  Manual Speed Setting (Manual Speed) ............................................. 7-20 

7.2.7  Current Correction (SET/DRIFT) Setting........................................... 7-21 

7.3 SETTINGS ............................................................................................ 7-23 

7.3.1  Communication Port Setting (COM Port Setting) .............................. 7-23 

7.3.1.1  Baud Rate Setting ..................................................................... 7-24 

7.3.1.2  Reception Port Setting (RX Port) .............................................. 7-26 

7.3.1.3  Reception Sentence Setting (RX Sentence) ............................. 7-27 

7.3.1.4  Transmission Port Setting (TX Port).......................................... 7-29 

7.3.2  Sector Blank Setting (Sector Blank) .................................................. 7-31 

7.3.3  TNI Blank Setting (TNI Blank) ........................................................... 7-33 

7.3.4  Bearing Pulse Output Adjustment (Output Pulse) ............................. 7-35 

7.3.5  Language Setting (Language) ........................................................... 7-36 

7.3.6  Date/Time Display Setting (Date/Time Setting) ................................. 7-37 

7.4 ADJUSTMENT ...................................................................................... 7-38 

7.4.1  Noise Level Adjustment (Noise Level)............................................... 7-39 

7.4.2  Adjustment of Target Tracking Function (TT) .................................... 7-41 

7.4.3  Main Bang Suppression Adjustment (MBS Level) ............................. 7-46 

7.4.4  Adjustment of Performance Monitor (NJU-85) .................................. 7-48 

7.5 MAINTENANCE 

MENU......................................................................... 7-50 

7.5.1  Scanner Safety Switch Setting (Safety Switch) ................................. 7-51 

7.5.2 

Initialization of Memory Area (Area Initial)....................................... 7-52 

Summary of Contents for JMA-5212-4















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JMA-5212-4

Hanna Instruments HI981520 Quick Reference Manual preview
HI981520
Brand: Hanna Instruments Pages: 2
Raymarine i60 ch wind Installation And Operation Instructions Manual preview
i60 ch wind
Brand: Raymarine Pages: 70
Garmin GMR FANTOM 4/6 Installation Instructions Manual preview
GMR FANTOM 4/6
Brand: Garmin Pages: 6
Garmin 320A Pilot'S Manual preview
320A
Brand: Garmin Pages: 8
Garmin 328 Pilot'S Manual preview
328
Brand: Garmin Pages: 10
KAPSCH G4 Mounting Instructions preview
G4
Brand: KAPSCH Pages: 2
Uniden UH-090 Owner'S Manual preview
UH-090
Brand: Uniden Pages: 16
Icom IC-M501 Operational Manual preview
IC-M501
Brand: Icom Pages: 42
Icom MR-1200RII Instruction Manual preview
MR-1200RII
Brand: Icom Pages: 56
Icom MA-510TR Instruction Manual preview
MA-510TR
Brand: Icom Pages: 64
Icom MR-1220 Series Instruction Manual preview
MR-1220 Series
Brand: Icom Pages: 80
Raytheon Anschütz ECDIS NX Compact System Manual preview
ECDIS NX Compact
Brand: Raytheon Anschütz Pages: 53
Gost GMM-IP67-HWS Quick Start Manual preview
GMM-IP67-HWS
Brand: Gost Pages: 2
Koden CVS-841 Operation Manual preview
CVS-841
Brand: Koden Pages: 122
Standard Horizon SL150 Owner'S Manual preview
SL150
Brand: Standard Horizon Pages: 12
1st-Relief VersaChock 1st23VCWHITE4PK Manual preview
VersaChock 1st23VCWHITE4PK
Brand: 1st-Relief Pages: 6
Sonic 2022 Operation Manual preview
2022
Brand: Sonic Pages: 210
Kohler 10EOZ Manual preview
10EOZ
Brand: Kohler Pages: 80

Brands by name

Popular brands

Load more brands