JR ProPo XG11MV, Operation Manual

Page: 34 / 136

32
⿟ DELAY FUNCTION
There are 8 kinds of delay function available when changing the dual rate setting. The start position, end position
and duration can be independently set.
Servos operate slowly when transitioning between dual rate settings. The default setting is INH (Inhibit).
Note that SW AUTO has a higher priority than FM-AUTO.
⿟ The Dual Rate setting numerical value can be between 0 and 125, and EXPO can be between 0 and ± 100.
⿟ By moving the appropriate control stick, the numerical values can be independently changed for left and right (up
and down), so that the control surface angles and curves can be individually adjusted. When the cursor is at the
inverse display, the setting values can be modified, and also reset using the CLR key.
▋
▋
Caution▋Note
⿟ Operate the servos and carefully confirm the operational settings before flying.
Function▋List
FM-AUTO (Flight mode change)
SW-AUTO (Changing the Switch Select)
INPUT (Flipping the switch)
The position before changing. The position before changing.
The position after changing.
The position after changing.
Delay time
Dual Rate amount
Exponential amount
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー