JR ProPo XG11MV, Operation Manual

Page: 32 / 136

30
▋ DUAL-RATE▋&▋EXPONENTIAL【D/R&EXP】
▋ ▋ Function▋Explanation
This function switches aileron, elevator, and rudder control surfaces between different control
surface angles and curves, using the Dual Rate switches. By combining the control surface angles
with exponential settings, it is possible to carry out various independent settings so that the
aircraft response can be changed.
Exponential is a curve adjusting function that logarithmically changes the servo movement in
response to the stick action, allowing the movement in the vicinity of the neutral position to be
adjusted from mild (+ direction) to quick (- direction) without changing the maximum control
surface angle. Adjustments made can be confirmed by looking at the graph on the screen.
▋
▋
Setting▋Method
Eight independent dual rate settings and exponential settings can be for Aileron, Elevator and Rudder.
Under D/R & EXP: page 1/4
⿟ Inputting the Dual Rate and Exponential values
Set the cursor to the control function and select the dual rate value to be changed. When the particular control
stick is in the neutral position, both the left and right (up and down) values are changed simultaneously. If you
wish to change the left/right (up/down) values independently, simply move the control stick in the desired
direction, and now you can independently adjust this function.
Under D/R & EXP: page 2/4
Note:
Please refer to the explanations for "Names of Each Transmitter Control" to find out which function is allocated to
which switch.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
FM-AUTO (Flight mode change)
SW-AUTO (Changing the Switch Select)
INPUT (Flipping the switch)
The position before changing. The position before changing.
The position after changing. The position after changing.
Delay time
Dual Rate amount
Exponential amount
FM-AUTO (Flight mode change)
SW-AUTO (Changing the Switch Select)
INPUT (Flipping the switch)
The position before changing. The position before changing.
The position after changing. The position after changing.
Delay time
Dual Rate amount
Exponential amount