JR ProPo XG11MV, Operation Manual

Page: 16 / 136

14
▋ DSM2▋Receiver▋connection▋method
JR labels the channels on the receiver with names rather than numbers. From this point onward in the manual, the
receiver channels will be described using their names.
▋ ▋ Connection▋list▋to▋the▋Receiver
RX Battery Charge Connector
BAT
T1
Auxiliary channel
Auxiliary channel
Auxiliary channel
Auxiliary channel
Auxiliary channel
Auxiliary channel
AU
X6
RD1231 Receiver
BAT
T2
Insert the connectors,
taking care of the
direction.
BIND PLUG
AUX5
AUX4
AUX3
AUX2
AUX1
AUX7
Bind button
1. Are the transmitter and receiver batteries fully charged?
2. Is the remote antenna securely connected?
3. Is the distance between the transmitter and receiver too close?
4. When the procedure is carried out on the top of a desk or
bench top that is made from metal, the binding procedure
may not be successful.
If the bind process or range check is not successful,
check the following items:
Check RF status
to be ON
When using a DSM2 module, be sure
to set the modulation type to PPM9
※When using a Gyro, carry out
the connection according to
the Gyro operation manual.
Switch harness
Rudder channel
Elevator channel
Aileron channel
/ Right Aileron(Glider)
Throttle channel
/ Right Aileron(Glider)
Bind plug
This is used during
the bind procedure.
・FLAP(Airplane/Glider)
・PIT.(Helicopter)
・GEAR(Airplane)
・GYRO(Helicopter)
・MOTO(Glider)
Binding terminal
Bind plug
Connect the
battery to a
spare channel
(such as AUX
channel)
Location of LED light
Preparation
⿟ Some of the internal parts of the receiver are fragile to the shock of a drop, vibration, water etc. Be sure to mount
so that impact to the airplane is not directly conveyed to the receiver.
⿟ For mounting, wrap the
receiver, batteries, etc. with
rubber foam and fix them
with rubber bands.
⿟ Some airplanes may use
many relay connectors
(extension leads) at the time
of mounting. In such case, fix
the connectors by wrapping
them with rubber etc., and
do not leave the connectors
dangled at all times.
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Receiver Helicopter Airplane Glider
1) THRO THRO THRO LAIL
2) AILE AILE AILE RAIL
3)
ELEV ELEV ELEV ELEV
4)
RUDD RUDD RUDD RUDD
5) GEAR GYRO GEAR MOTO
6) AUX1 PIT. FLAP FLAP
7) AUX2 AUX2 AUX2 AUX2
8)
AUX3 AUX3 AUX3 AUX3
9)
AUX4 AUX4 AUX4 AUX4
10)
AUX5 AUX5 AUX5 AUX5
11) AUX6 AUX6 AUX6 AUX6