JR ProPo XG11MV, Operation Manual

Page: 106 / 136

104
⿟ V-Tail (V-TAIL)
Used to perform mixing for a V-tail airplane.
The following channel outputs are used:
Channel 3 (ELEV) : Left Tail (LTAL)
Channel 4 (RUDD) : Right Tail (RTAL)
⿟ Dual Channel (DUAL) / Mate Trim (TRIM)
A Dual channel can be chosen for the following
functions. Select the Channel to use for the Dual
output. It is also possible to active trim for the Dual
channel.
፧ Aileron (AILE)
፧ Elevator (ELEV)
፧ Rudder (RUDD)
፧ Flap (FLAP)
⿟ Twin Engine (TWIN ENGINE)
This allows mixing for twin engine aircraft. Select & set the required second channel for the throttle.
Note that it is possible to add normal throttle trim to this second channel, or add a separate Trim Lever as the
second throttle trim.
▋ ▋ For▋Glider
Dual Aileron is the standard Wing type for Glider.
Channel2 (AILE) : Right Aileron (RAIL)
Channel6 (FLAP) : Left Aileron (LAIL)
⿟ V-Tail (V-TAIL)
This is mixing for a V-Tail airplane.
The following channel outputs are used:
Channel 3 (ELEV) : Left Tail (LTAL)
Channel 4 (RUDD) : Right Tail (RTAL)
⿟ Dual Channel (DUAL)
A Dual channel can be chosen for the following
functions. Select the Channel to use for the Dual
output. It is also possible to active trim for the Dual
channel.
፧ Elevator (ELEV)
፧ Rudder (RUDD)
፧ Flap (FLAP)
፧ Spoiler (SPOI)
▋
▋
Caution▋Note
Actually operate the servos and carefully confirm
the settings before flying.
Wing Type
V Tail
Twin Engine
Dual Channel / Mate Trim
System▋List▋
V Tail
Dual Channel
V Tail
Dual Channel