JR ProPo XG11MV, Operation Manual

Page: 43 / 136

41
▋ Pitch▋Curve【PITCH▋CURVE】
▋ ▋ Function▋Explanation
This function adjusts pitch operation in response to throttle stick operation. The servo position
can be set independently for a maximum of 7 point positions. In addition, an EXPO (exponential)
function is also incorporated to allow smooth throttle stick connection of each of the points. This
function is available in each Flight Mode for helicopters (maximum 6), and 2 modes for airplanes.
▋
▋
Setting▋Method
There are three initial curve points set at the slow, center, and high positions. To add a point, set the stick to the
desired position and press the “ADD” key. In the situation where a point is to be deleted, this should be carried
out using the “DEL” key. To change vales at each point, rotate the dial to move to and select the point that you
wish to change (inverse display). Then press the dial to select and change the numerical value.
▋ ▋ For▋Helicopter
There are six (6) flight modes (i.e. Normal, Stunt 1-4, hold ) available for helicopter pitch curves. Set each throttle
curve as desired for the particular flight condition.
⿟ High Pitch trim (HiPIT)
High Pitch Trim Lever
Using the lever on the side of the
transmitter, pitch adjustment at
the high point is possible. This
function is initially inhibited – it
must be activated to use. After
activating, select the lever either
on the left or right side of the
transmitter using “INPUT”. The
lever should normally be left in
the center position, and should
be used for dynamic adjustment.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Adjusting point display Current
Flight mode position
Each Adjusting point input
Position and output position
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position Point addition and deletion
Caution:
Points 1, 2 and 3 will be
influenced by the Hover
pitch trim.
In addition, the High
pitch trim will also be
influenced Point H.
Normal mode
Stunt mode
Current Flight Mode position
High Pitch Lever usage
Usage Lever
Movement Amount
Adjusting point display Current
Flight mode position
Each Adjusting point input
Position and output position
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position Point addition and deletion
Caution:
Points 1, 2 and 3 will be
influenced by the Hover
pitch trim.
In addition, the High
pitch trim will also be
influenced Point H.
Normal mode
Stunt mode
Current Flight Mode position
High Pitch Lever usage
Usage Lever
Movement Amount
Adjusting point display Current
Flight mode position
Each Adjusting point input
Position and output position
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position Point addition and deletion
Caution:
Points 1, 2 and 3 will be
influenced by the Hover
pitch trim.
In addition, the High
pitch trim will also be
influenced Point H.
Normal mode
Stunt mode
Current Flight Mode position
High Pitch Lever usage
Usage Lever
Movement Amount
Function▋List