JR ProPo XG11MV, Operation Manual

Page: 26 / 136

24
▋
INFO▋Screen
▋ ▋ Pages▋Accessed▋from▋the▋Initial▋INFO▋Screen
Functions▋Common▋to▋All▋Models
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter
Glider
Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter Glider Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key
Sub Info Screen Refer to the Page 26 "My List Screen"
▋ ▋ Sub▋information▋screen
When viewing the initial INFO screen,
rotate the jog dial to the right and a
second page appears. This page is the
sub information screen. On this sub
information screen, it is possible to
view a maximum of six of the items
listed on the right. When operating
DMSS systems using telemetry, it is
possible to view telemetry data on
this screen.
Refer to the Page 95 "Telemetry System
【TELEMETRY】"
※ Note:
The table indicates telemetry
functions which require optional
sensors (available separately).
▋ ▋ Items▋which▋can▋be▋displayed▋on▋the▋Sub▋Information▋screen
Item Modulation Type Sensor Required
INH Any・Modulation Any・type -
RX・BATTERY DMSS・only Any・type -
TEMPERATURE DMSS・only Any・type 〇
RPM DMSS・only Any・type 〇
ALTITUDE DMSS・only Any・type 〇
AIR・PRESSURE DMSS・only Any・type 〇
VARIOMETER DMSS・only Any・type 〇
F-PACK・VOLT DMSS・only Any・type 〇
F-PACK・CAPA DMSS・only Any・type 〇
F-PACK・AMP DMSS・only Any・type 〇
F-PACK・WATT DMSS・only Any・type 〇
TIMER・1 Any・Modulation Any・type -
TIMER・2 Any・Modulation Any・type -
TIMER・3 Any・Modulation Any・type -
FLIGHT・MODE Any・Modulation Any・type -
TX・BATTERY Any・Modulation Any・type -
THRO・STICK Any・Modulation HELI/ACRO -
THRO・CURVE Any・Modulation HELI/ACRO -
PITCH・CURVE Any・Modulation HELI/ACRO -
SPOI・STICK Any・Modulation GLID -