JR ProPo XG11MV, Operation Manual

Page: 3 / 136

1
Introduction
▋ Greetings
Thank you for choosing to purchase this JR product.
This is a highly developed product with outstanding
functionality and ergonomics that concentrates the
essence of the technology built up by this company
through many decades of experience. In order to make
full use of the features of this radio and to safely enjoy
your RC activities, please carefully read this operation
manual.
Our whole company hopes that you will enjoy using this
product for many years.
▋
Features
This is a multi-function 11-channel transmitter that is
capable of supporting many aircraft. It has functionality
normally only seen in more expensive transmitters.
⿟ JR’s newly developed DMSS system maintains high
speed servo response while allowing simultaneous
use of telemetry functions.
⿟ The high- speed telemetry function allows
information from the aircraft (that was previously
unknown to the user) to be monitored on the
transmitter. In addition, alarms with unique sounds
alert the user to the situation on the aircraft without
even looking at the screen.
⿟ The telemetry sensor connection employs a bus
system that does not require a relay box, allowing
sensor extensions and additions to be easily carried
out. It is acceptable to merely connect the necessary
sensors in parallel.
⿟ Using an automatic safety system, the receiver
will not operate if the correct model has not been
selected in the transmitter before flight.
⿟ The transmitter has an easy to read backlit LCD
display and input keys that are intuitive and easy to
use.
⿟ An E-ring function is incorporated allowing easy
limitation of the operation range of the CCPM swash
plate servos.
⿟ A Trim Input function can allocate trim levers to
change numerical values of various functions (such
as program mix values) during flight.
⿟ A new function synchronizes the operation of servos
on multiple flight control surfaces in real time. This
completely eliminates the time lag where fast control
inputs are required.
⿟ A SD card slot is provided which enables saving
of aircraft model data and updating of transmitter
Software to be easily carried out, without connecting
the transmitter to a PC.
⿟ When inputting numerical values, simultaneously
pressing the function key allows the value to
bechanged at a ten-times faster speed.
⿟ The 30-aircraft model memory can be utilized for
storing helicopter, airplane, and glider models.
⿟ A Trainer function is incorporated, which also allows
training to be carried out individually for each stick
channel.
⿟ The throttle curve, pitch curve, and curve mixing
use a multiple point adjusting method, and you can
activate an optional exponential curve function that
further smoothes the curves.
⿟ Six systems of multi-function program mixing are
available.
⿟ A Touch Select function enables automatic switch
selection for programmed functions. This selection
is easily carried out.
⿟ A ‘My List’ screen is provided that enables display
and simple calling up of only functions that the user
has selected.
⿟ Compatible with various JR RF modules such as
DMSS, DSM2, DSMJ, FM and SPCM .
NEM-B75A
Radio Frequency TX Module Type of RF Modulation Power Consumption
2.4GHz TG2.4XP DMSS DMSS 300mA
2.4GHz TD2.4GM/EM DSM2 DSM 220mA
72 / 40MHz TS-72J SPCM / FM SPCM / PPM9 / PPM8 300mA
----- ----- ----- ----- 130mA
▋ ▋ Transmitter▋Specifications
Items Specifications
Part Number: NET-P141M
Type of control: 11 channel computer mixing
Power source: 9.9V Li-Fe battery
3F2100 (2100mA)
Neutral position: 1.5ms
▋ ▋ Charger▋Specifications
Items Specifications
Part number : NEC-J17C
Input Voltage : DC15V Max 0.7A
Output Voltage : DC11V 500mA
▋ ▋ AC▋Adapter▋Specifications
Items Specifications
Part number : NEC-A1530
Input Voltage : AC100V-240V 50/60Hz
Output Voltage : DC15V 30W