f. Emergency failure interlock
- Gas leak detector
4. As for terminal base position and contact specification, see Figure 39.
5. Use a shield wire that has a maximum of extension 650 ft (200 m) and is more than 0.0027 in.
2
(1.75 mm
2
)
6. Terminals that are not shown in the figures are already connected in the factory.
* indicates a connection is required.
Upper communication specification
The information in this section applies to the CG Series of direct fired absorption chiller-heaters.
Upper communication system configuration
The configuration of the upper communication system is shown in Figure 43.
Figure 43: Upper communication system configuration
Model YHAU-CGN/H-CXR(M)Double Effect Direct Fired Small Absorption Chiller-Heater
76
