Johnson Controls York MaxE YK Series, Manual

Page: 71 / 139

JohNSoN CoNtroLS
8
ForM 160.75-N1 (309)
notEs:
1. All dimensions are approximate.
2. For compact water boxes (shown above), determine overall unit length by adding water box depth to tube sheet length.
3. Water nozzles can be located on either end of unit. Add 1/2" (13 mm) to nozzle length for flanges connections.
4. to determine overall height, add 7/8" (22 mm) for isolators.
5. Use of motors with motor hoods may increase overall unit dimensions.
fig. 4 – DIMENSIoNS – h CoMPrESSor UNItS (Ft–IN)
h coMPrEssor units (standard)
ADDITIONAL OPERATING HEIGHT CLEARANCE TO FLOOR
TYPE OF CHILLER MOUNTING M
NEOPRENE PAD ISOLATORS 1 3/4"
SPRING ISOLATORS 1" DEFLECTION 1"
DIRECT MOUNT 3/4"
H9 COMPRESSORS
EVAP. – COND. SHELL CODES
K–K
K-O
M–M
A 7'–6 1/2" 8'-9 1/4" 8'–7"
B 10'–4" 10'-7 5/8" 10'–10 1/2"
C 2'–1 1/4" 2'-1 1/4" 2'–4 1/2"
D 1'–8" 2'-3 3/8" 1'–11"
E 14'–0" 14'-0" 14'–0"
LD07135