Johnson Controls
5513350-JTG-1018
87
NOTES:
1.
Economizer cabinet weight must be included in all units.
2.
Pre-evaporator blank can be a blank section or include an air blender.
3.
Heat section cabinet option for any of the following:
a. Top or right discharge
b.
and/or discharge filters, humidifier or sound attenuator, or blank post-evaporator section
c. Requires discharge plenum. Discharge can be bottom, left, right, or top.
4.
Heat and discharge through heat option is used unless any of the following are included:
a. Discharge filters
b.
Humidifier, sound attenuator, or blank post-evaporator section
c. Top or right discharge
d. Discharge plenum
5.
Small post-evaporator blank can contain
blank
or
final
filter
or
humidifier
or
sound attenuator
.
6.
Large post-evaporator blank can contain
blank
or
sound attenuator and final filter
or sound
attenuator and humidifier
or
humidifier
or
sound attenuator
.
7.
Discharge plenum is required with all units that are cooling only. Discharge plenum is required on all units with heat section cabinet.
8.
Supply fan weights include the supply fan, motor, isolators, inlet guards, shaft grounding ring, variable frequency drive (VFD), line reactor, discon
-
nect, and VFD bypass.
9.
Economizer with exhaust/return fan includes the weight of the fan, isolator, shaft grounding rings, extended lube lines, and inlet guards.
10.
The exhaust/return fan motor includes the weights of the motor, VFD, line reactor, and VFD bypass.
11. All sizes of electric heat.
12. A transformer is required if convenience outlet, gas heat, lights, or high end display are selected.
13.
Roof curb weight is not included with this table.
Weights and Dimensions (Continued)