Coffeemar
G-250
//
Coffee
MNP116M01GBV00
Date: 09/04/2013 Rev. 1
PAGE 66 OF 95
begins a process of the following type.
►
Brewing a concentrated coffee.
The display shows the measured brewing speed.
A correlation is determined between the difference in target and measured speeds with
the number of adjustments to carry out.
Target vs. Measured
Adjustments
Greater than or equal to 0
pulses/s
End of process
Between -0.0 and -1 pulses / s
1 setting to finer grind
Between -1 and -2 pulses / s
3 settings to finer grind
Less than -2 pulses / s
5 settings to finer grind
Carry out the adjustments based on the above table.
Empty the mill of ground coffee before carrying out the adjustment. Carry out the
following procedure at least twice.
1.
Position the coffee assembly.
2.
Grind.
3.
Wet the puck with some water to compact it.
4.
Move the assembly to eject the puck
You should be able to cancel this process by
When adjusting to a finer grind, you should attempt to reach a setting with an error under
1 pulse/s the necessary number of times.
When you are in
MANUAL GRIND ADJUSTMENT
This field allows you to move the adjustment motor manually.
when you enter it you should choose whether you wish to move to a coarser
grind or a finer grind.
Every time you press
it will move 250 ms in the chosen direction. To help in
the adjustment, a counter of the movements made since you entered the option is
displayed.
___________________________________________________________________
(081) SOLUBLE PRODUCTS
COFFEEMAKER CONFIGURATION
INSTANT PRODUCTS