Coffeemar
G-250
//
Coffee
MNP116M01GBV00
Date: 09/04/2013 Rev. 1
PAGE 86 OF 95
They are pre-coated filters using active carbon dust to remove all impurities larger than
1 µm, as well as undesirable
flavours and smells
. This results in a better quality
product that also reduces health hazards and lengthens the working life of machine
parts.
This type of filter also prevents scale formation, provided the hardness level of the water
supply of the machine is less than 20 °f (French degrees). If the water used to prepare
the various drinks dispensed by the machine has a higher level of hardness, the water
softener kit is recommended.
1.
Installation head QL3 with support, 3/8” NPT water inlet and outlet, and an integrated
stopcock. The head is mounted on the cartridge by turning it on the cartridge nozzle until
it stops.
2º.
4H model cartridge replacement with an average flow of 1.9 l/min and an approximate
processing capacity of 5680 litres.
The following should be taken into account before using
this type of filter:
► Before using the filter rinse it for 2 minutes under full
flow and pressure to get rid of any air in the cartridge.
► Maximum working pressure is 10 bar.
► Maximum water temperature should not exceed 38 °C
(100.4 °F).
► The filter should be installed in vertical position.
To replace the cartridge when it is saturated, follow the
instructions included with the replacement cartridge.
A.
Filter cartridge
B.
QL3 Head
Fig. 57