JMC ITJ932P100-3Y, Use And Maintenance Manual

Page: 23 / 32

J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento | J2S Naples | J900 | JS 32 | JS 43 | JS 49 | JS 55 | JS 65 J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento | J2S Naples | J900 | JS 32 | JS 43 | JS 49 | JS 55 | JS 65
44 45
5.8 5.2 5.7
INSTRUCTIONS
Slide four 1.5V AA Lithium primary batteries inside the housing batteries (5.8) ,
respecting the specified polarity, to ensure the correct electrical connection
between batteries and its housing.
At each electrical connection of the battery, the RED LED indicator inside the
sensor
(5.2) lights up for about 6 seconds, indicating the correct electrical
connection of the power supply from the housing batteries.
WARNING
Batteries not included
5.3 BATTERIES POSITIONING
AUTOMATIC LOADER
It’s possible to trigger the automatic pump loading system that allows you to
level the suction fluid. This function is activated by accessing the sensor
(5.2)
continuously only at each battery power connection. The function remains
active until the hand blinds the sensor or for a maximum time of about 60
seconds. The function is deactivated in advance by removing the blinding.
DISPENSING OF GEL
At this point, every time the sensor (5.2) will be blinded, the system will be
activated to dispense a quantity of product (Gel/ Solution handwash), at
the same time the RED light inside the sensor will emit a short flashing. The
sensor will be waiting for a subsequent blinding by the user to get back into
operation.
5.4 GEL DISPENSER CONFIGURATION