J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento |
J2S Naples
|
J900
|
JS 32
|
JS 43
|
JS 49
|
JS 55
|
JS 65
J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento |
J2S Naples
|
J900
|
JS 32
|
JS 43
|
JS 49
|
JS 55
|
JS 65
42
43
C
B
A
INSTRUCTIONS
1. Open the lock
(7.1)
of the lower door
(7.)
on the back of the totem with the key
(7.2)
supplied and put the door
(7.)
aside.
2. Remove the suction tube
(15.2)
of the gel from the tank
(15.)
lifting it upwards
and place it next to the tank.
3. Holding the totem firmly, grasp the tank
(15.)
at the top and pull it towards
you to release it from the totem structure
(1.)
.
4. Lift the tank
(15.)
and place it on a flat surface outside the totem that allows
it to be kept upright.
5. Unscrew the tank cap
(15.1)
. Pour the sanitizing gel inside the hole, paying
attention to avoid a leak of gel. The use of a small funnel is recommended.
6. Once the maximum capacity limit has been reached, screw the cap back
on
(15.1)
.
7. Grasp the tank
(15.)
and place it inside the special support shelf
(16.)
,
matching the two elements of the hooking strip. By applying horizontal
pressure to the tank, it will snap securely to the chassis.
8. Make sure that the tank
(15.)
is locked inside the support compartment.
9. Reposition the lower closing door
(7.)
and close the lock
(7.1)
with the
appropriate key
(7.2)
.
5.2 TANK FILLING
FORMATS
Inside the totem there is an
integrated tank in stainless steel
with a capacity of 3 L. There are
two optional tanks of:
•
5 L (J2S Milan);
•
5 L box (J2S Agrigento).
WARNING
For the correct functioning of the gel dispenser
(5.)
it is strongly recommended
to use
J-Gel
or a
spray sanitizing gel
.
A
Closing cap
(15.1)
for the filling
hole of the tank
B
Hole for air passage
C
Insertion hole for stainless
steel pipe
(15.2)
WARNING/DANGER
The sanitizing gels are
alcohol-based
and subject to
risk of flammability
. It
is
forbidden to use open flames
close to the totem, in particular to the gel
dispenser
(5.)
and the tank
(15.)
.
WARNING
Pour the sanitizing gel inside the tank
(15.)
not beyond the maximum capacity
of the tank. In case of
accidental gel spillage
, it is mandatory to
turn off the
power switch
(8.1.A.)
and
unplug the power cable
(8.2.A.)
from the outlet to
clean safely. Wipe away excess gel with a
dry cloth
.
Summary of Contents for ITJ932P100-3Y
Page 32: ...62 ...
