JMC ITJ932P100-3Y, Use And Maintenance Manual

Page: 5 / 32

J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento | J2S Naples | J900 | JS 32 | JS 43 | JS 49 | JS 55 | JS 65 J2S Venice | J2S Rome | J2S Florence | J2S Milan | J2S Agrigento | J2S Naples | J900 | JS 32 | JS 43 | JS 49 | JS 55 | JS 65
9 8
2. WARNINGS
RISK OF OVERTURNING
The totem must be suitably fixed to the ground to exclude the possibility of
overturning and consequent injuries to people or objects. For more information
on installing the totem, see chapter 5.
RULES FOR EFFICIENT AND SAFE USE OF TOTEMS
Do not push, pull, lift or climb the totem, the company declines all responsibility
for any injuries caused by overturning the product or collision. Do not drop
the totem and be careful not to scratch it with sharp objects, the totem could
be damaged and the company is not liable for this type of damage. In the
totems in which the shelf
(3.) is present one must not cling to, sit down, place
very heavy objects or leverage on it, it could flex.
MAINTENANCE SAFETY
To carry out any action on the totem it is necessary to wear gloves, to avoid
getting injured, dirty or damaged.
CLEANING
Please note that the totem requires periodic cleaning.
2.1 GROUND FIXING
2.2 PROPER AND SAFE USE
RULES FOR EFFICIENT AND SAFE POWER SUPPLY OF TOTEMS
Connect the totem only to standard electrical systems. The company declines
all responsibility for electrical damage.
ELECTRICAL AND ELECTRONIC COMPONENTS
The totem contains electrical and electronic devices that must absolutely not
come into contact with liquids. Therefore it is necessary to place the totem in a
place covered from bad weather.
Likewise, do not throw dust on the totem pole as they could enter through the
ventilation holes.
2.3 POWER SUPPLY
2.4 INNER COMPONENTS INTEGRITY
2.5 COMPONENTS NOT INCLUDED
BATTERIES
The four 1.5V AA size Lithium primary batteries required for proper functioning
of the totems are not included.
PRINTERS PAPER ROLLS
The printers paper rolls are not included.