SECTION 5 - EMERGENCY PROCEDURES
3121773
– JLG Lift –
5-3
Operator Unable to Control Machine
IF PLATFORM OPERATOR IS PINNED, TRAPPED OR
UNABLE TO OPERATE OR CONTROL MACHINE:
1.
Other personnel should operate the machine from
ground controls only as required.
2.
Other qualified personnel on the platform may use
the platform controls. DO NOT CONTINUE OPERA-
TION IF CONTROLS DO NOT FUNCTION PROPERLY.
3.
Cranes, forklift trucks or other equipment can be
used to remove platform occupants and stabilize
machine motion.
Platform or Boom Caught Overhead
If platform or boom becomes jammed or snagged in
overhead structures or equipment, rescue platform
occupants prior to freeing the machine.
NOTE:
The engine runs the hydraulic pump which provides
hydraulic pressure for the hydraulic system.
The electric power provides power for the hydraulic
proportional valve solenoids to open and close which
operate various solenoids and relays on the hydraulic
system. In the event either/or both are not operating
properly, the following procedures will allow the low-
ering of the boom and platform.
To
order
go
to
Discount-Equipment.com
