SECTION 4 - MACHINE OPERATION
4-12
– JLG Lift –
3121773
CHECK BUBBLE LEVEL INDICATOR TO CONFIRM UNIT IS LEVEL (BUBBLE IS IN
THE 1° GREEN
(CENTER)
AREA) AND TRACKS ARE OFF THE GROUND BEFORE
OPERATING THE BOOM FUNCTIONS. IF BUBBLE IN THE LEVEL INDICATOR IS
NOT IN THE GREEN AREA, AFTER USING THE AUTO-LEVEL FUNCTION, SHUT
DOWN THE MACHINE AND HAVE THE MACHINE REPAIRED BY A QUALIFIED
SERVICE TECHNICIAN.
Each outrigger has a orange light installed. All lights will be
on steady when outriggers are properly set and machine is
leveled. No lights will be on if the outriggers are not set
properly.
IF ONE OF THE ORANGE LIGHTS LOCATED ON EACH OUTRIGGER SHOULD
FLASH OR REMAIN ON WHEN THAT OUTRIGGER IS LIFTED FROM THE
GROUND, STOP THE MACHINE IMMEDIATELY AND CALL A QUALIFIED JLG
SERVICE TECHNICIAN AS THIS INDICATES A PROBLEM WITH THE CORRE-
SPONDING OUTRIGGER MICRO SWITCH.
IF SLOPE EXCEEDS 13°, THE MACHINE IS NOT CAPABLE OF PROPERLY SET-
TING OUTRIGGERS AND LEVELING ITSELF. OPERATION OF BOOM AND PLAT-
FORM FUNCTIONS WILL NOT BE ALLOWED IN THIS CONDITION. THE
MACHINE IS CONSIDERED STABILIZED WHEN LEVELED TO LESS THAN 1° AND
TRACKS ARE LIFTED AT LEAST 2 IN. (5 CM) FROM THE GROUND.
STABILIZING MACHINE WITH AN INCLINATION DEGREE HIGHER THAN THE
ONE ALLOWED COULD CAUSE INSTABILITY OF THE MACHINE
If the platform ladder is higher than 16 in. (40 cm) off the
ground when the ladder is lowered, when setting the
machine on outriggers from the ground position, lower the
outriggers until the ladder is less than 16 in. (40 cm) off the
ground. Then enter the platform to properly set the machine
up on outriggers.
To
order
go
to
Discount-Equipment.com
