Jetter JVM-407B-HMI, User Manual

Page: 67 / 300

Jetter AG 67
JVM-407B Mounting and installation of the JVM-407B
The illustration shows the installation.
Number Description
1
Support arm base
2 4 x screw holes
3 4 x lock washers
4
4 x screws M 5 x 14 mm + thickness of mounting surface
(It is permitted to use e.g. hexagon socket head cap screws DIN 912)
5 Support arm
Step Action
1
Place the support arm on the installation surface.
2 Screw the support arm firmly into place from underneath using four screws
and four lock washers.
3 Guide the cable through the support arm base.
4 Push the support arm onto the support arm base. It must click into place.
5
Loosen the locking lever.
6 Adjust the angle of the HMI so that it is comfortable for the user.
7
Lock the HMI into place by tightening the locking lever.
Mounting the support
arm base