Jetter JVM-407B-HMI, User Manual

Page: 47 / 300

Jetter AG 47
JVM-407B Mounting and installation of the JVM-407B
Pin Description
5
OUT_CAN_2_H
13 OUT_CAN_2_L
16
Shield
To enable the resistor in the JVM-407B as bus termination resistor, connect
the TERM_CAN_2 pin with pin OUT_CAN_2_H.
The diagram shows the pin assignment of the connector for the CANopen®
bus 3 (as viewed from the cable side):
Pin Description
6
IN_CAN_3_H
7 TERM_CAN_3
8 OUT_CAN_3_L
14
IN_CAN_3_L
15 OUT_CAN_3_H
16 Shield
To enable the resistor in the JVM-407B as bus termination resistor, connect
the TERM_CAN_3 pin with pin OUT_CAN_3_H.
To satisfy EMC requirements, connect the CAN cable shield to the module
housing. Connection of pin 16 (shield) alone is insufficient for effective
shielding.
Connect the shielding of the CAN cable to the threaded pin of the module
housing:
Activating the Bus
Termination Resistor
Pin Assignment
CANopen® 3
Activating the Bus
Termination Resistor
Shield