Jetter JVM-407B-HMI, User Manual

Page: 53 / 300

Jetter AG 53
JVM-407B Mounting and installation of the JVM-407B
To support differential video signals, an additional GND signal is required.
Connect V- on the camera or on the JXM-MUX with GND.
The advantage of such a wiring is that it compensates noise.
DC 12 V
DC 12 V
V+ V+
GND
GND
V-
To satisfy EMC requirements, connect the video cable shield to the module
housing. The ground connections (pin 4 and pin 6) are insufficient for effective
shielding.
Connect the video cable shield to the threaded pins of the module housing:
Number Part
1
Threaded pin of the module housing
2 Washer
3
Cable lug
4
Lock washer
5 Screw nut
Option: Differential video
signal
Shield