Jetter JVM-407B-HMI, User Manual

Page: 270 / 300

270 Jetter AG
13 Application program
Application program - Default path
When uploading the application program from JetSym to the controller, this
program is stored as a file to the internal flash disk. The device enters the path
and file name into the file \App\start.ini .
In the directory \App , JetSym, by default, creates a folder and assigns the
project name to it. Then, JetSym stores the application program to this
subdirectory assigning the extension *.es3 to it. Path and file names are
always converted into lower case letters.
This file is a text file with one section holding two entries:
Element Description
[Startup] Section name
Project Path to the application program file, relative to \App
Program Name of the application program file
Example:
[Startup]
Project = test_program
Program = test_program.es3
Result: The application program is loaded from the file
\App\test_program\test_program.es3
.
 Storing the application program to the SD card (see page 271)
Introduction
Path and file name
The file \App\start.ini
Related topics