Jetter JVM-407B-HMI, User Manual

Page: 87 / 300

Jetter AG 87
JVM-407B Initial commissioning
Step Action

The screenshot below shows an example of the completed dialog box:
Important note:
The names must not contain blanks. Otherwise, it will be difficult to delete
the visualization files at a later date.
9 Confirm your settings by clicking OK .
Result:
The dialog box closes and the Add New Mask dialog box opens.
10 Enter the name of the first DataMask into the box Name . Leave all other
settings unchanged This mask is automatically the active mask when
launching the HMI.
11 Confirm the settings by clicking OK .
Result: Creation of the project is completed.