Jersey Jack Pinball The Hobbit, Operation Manual

Page: 77 / 347

The Hobbit Menu System B-47
USB Update
Use the USB Update utility to apply a Hobbit delta software update to your game. Note: The
update must be downloaded from the JJP® support website (
https://www.jerseyjackpinball.com/
support/ ), using a separate computer. Copy the “hobbit_update” folder from your computer onto
an empty USB memory stick (i.e. it should be the only folder on the stick). Power up the game,
open the coin door, and use the diagnostics buttons to enter the USB Update utility; the LCD
monitor will display the screen shown in figure B36.
Locate the end of the USB extension cable, just inside the open coin door. Fully insert the USB stick
into the connector at the end of the cable (if your USB stick is equipped with an “in-use” light, it
will illuminate).
To attempt the USB delta update, press the
Enter
button. The game’s playfield and LCD monitor
will go blank/dark for approximately 15-30 seconds (depending upon the size of the update). You
can abort the update process by pressing the Back/Escape button. When the game and monitor
come back to life, verify that the delta update installed successfully by re-entering the Hobbit
Menu System. The installed software version is displayed in the lower, right hand corner of most
menu system screens.
When you’re satisfied that the delta update was applied correctly, remove the USB stick from the
end of the USB extension cable (there is no need to power down the game before performing this
action). To exit the USB Update utility, press the Back/Escape button.
Figure B36. USB Update utility screen.