Jersey Jack Pinball The Hobbit, Operation Manual

Page: 21 / 347

Game Assembly & Setup A-9
Figure A16. The playfield is removable. Figure A15. Moving the playfield to position 4.
1
2
Figure A14. Moving the playfield to position 3.
14)
Move the playfield from position 2 to 3 (figure A14). Pull it upward and outward
until the second pair of rubber feet in the support tubes reach the top of the lockdown
bar receiver; again, lower the playfield, resting the feet in the channel.
15)
Move the playfield from position 3 to 4 (figure A15). Pull it outward until the play-
field support/slide bracket stop is reached; then swing the playfield up, resting the bot-
tom arch against the front of the backbox.
Note:
As shown in figure A16, the playfield can be completely removed from the cabi-
net. Disconnect all connectors in the wiring harness and, with one person at the front of
the playfield and one at the back, carefully lift it straight up and out of the cabinet. The
playfield can then be placed on any flat surface, supported by its tubes, for maintenance.