Jersey Jack Pinball The Hobbit, Operation Manual

Page: 337 / 347

Game Service & Troubleshooting E-13
6)
Throughout the ISO image copy/burn process, the window in figure E13 will be displayed and updated.
7)
When the copy/burn process is complete, the window in figure E14 will be displayed. WARNING: DO NOT
CLICK THE ‘ Reboot Now’ BUTTON! Click the Exit button or the red X in the upper corner of the window.
8)
Remove the USB stick from your personal computer. Power your game down and insert the USB stick you
burned into the USB cable attached to the cabinet divider, behind the coin box, just inside your game’s coin door.
9)
Power up your game with the USB stick inserted. The game will auto-update with no user input; do not power
the game down during the update process (which will take less than 5 minutes).
10)
When the update is complete, the screen in figure E15 will be displayed on the game’s LCD monitor. Power
the game down, remove the update USB stick and power it on again. Your game will boot up running the new ver-
sion of software (which can be verified by entering the Hobbit menu system - see Section B). Store your 8 GB USB
stick in a safe place; it can be used to perform another full software update in the future (to this same software
version or a newer one).
Figure E13. UNETBOOTIN copy/burn progress window.
7
Figure E14. UNETBOOTIN installation complete window.
Figure E15. Update installation complete!