Jersey Jack Pinball The Hobbit, Operation Manual

Page: 15 / 347

Game Assembly & Setup A-3
If you wish to save your shipping carton:
2)
With the help of at least one other person, carefully tip the carton over and
lay it on its “TRUCK THIS SIDE ONLY” side (see figure A3a). Using the nylon strap
as a handle, slide the game and packing materials out of the carton.
3)
DO NOT CUT THE NYLON STRAP holding the backbox down at this point.
Remove the foam padding from the corners of the game and carefully stand it
upright again (as it was in the carton during shipping).
Figure A3a. Sliding the game out of the carton.
If you do not wish to save your shipping carton:
2)
Using a utility knife, remove the “TRUCK THIS SIDE ONLY” side of the shipping
carton (see figure A3b). Carefully cut down the left and right sides of the box.
Let the flap fall to the floor, then cut across the bottom edge (taking care not to
damage the floor).
3)
DO NOT CUT THE NYLON STRAP holding the backbox down at this point. Re-
move the foam padding from the corners of the game.
1
2
3
Figure A3b. Removing the “TRUCK THIS SIDE ONLY” side of the carton.
or
Note:
You may need to spread a blanket or some other form of cushion under
the game to protect the floor.