Jersey Jack Pinball The Hobbit, Operation Manual

Page: 17 / 347

Game Assembly & Setup A-5
B
J
Figure A7. Raising the backbox to its upright position.
7)
Using wire cutters, cut the nylon strap holding the backbox down ( CAUTION : pro-
tect your eyes and have helpers/bystanders move away! The ends of the cut strap
will likely whip violently away from the game!). Remove the remainder of the packing
material from the game and raise the backbox to its upright position (see figure A7).
Ensure that the cables and wires in the neck of the game do not get pinched at any
time during this process.
6)
With the help of at least one other person, carefully tip the game onto its front
legs. Lift the rear of the cabinet and have two people support it or place it on a stur-
dy support. As with the front legs, attach the two rear legs, using the four remaining
acorn-head bolts. Tighten all bolts firmly, while maintaining upward pressure on the
legs (see figure A6). Lower the game onto its legs.
Pressure
Figure A6. Installing the rear legs and cabinet protectors.