Jersey Jack Pinball The Hobbit, Operation Manual

Page: 16 / 347

Game Assembly & Setup
A-4
Pressure
Figure A5. Installing the front legs and cabinet protectors.
4)
Locate the game’s four legs. Adjust the tightening nut and leg leveler on each leg
(see figure A4). For the two front legs, position the nut all the way down, next to the
foot of the leveler. For the two rear legs, position the nut approximately three-quar-
ters of the way up the leveler. Thread the leveler into each leg until the tightening
nut is against its underside.
Figure A4. Adjusting a leg leveler and tightening nut.
5)
Locate the eight acorn-head leg bolts in the loose parts. Thread 2 leg bolts
through each leg and attach it to the cabinet (see figure A5). Using a 5/8” socket and
ratchet or a 5/8”wrench, tighten the bolts firmly, while maintaining pressure (in the
direction of the red arrow) on each leg.