Jeep Gladiator 2021 Owner'S Manual Download Page 92

Page: 92 / 484

GETTING TO KNOW YOUR VEHICLE

5. Using the provided #T50

Torx head driver

and ratchet, install and tighten the Torx

fasteners by turning them clockwise.

Secure them until they are snug, being

careful not to cross-thread the fasteners or

overtighten. Refer to the following table for

recommended torque specifications.

Repeat on the opposite side.

Step Five

6. Before driving the vehicle with the top in the

Sunrider® position, ensure the top is

secured with the provided hook-and-loop

fasteners

page

84.

Step Six

Torque

Specification

For Torx

Fasteners

Maximum

Minimum

119.5

in-lbs

(13.5

N·m)

150.5

in-lbs

(17.0

N·m)

106.2

in-lbs

(12.0

N·m)

CAUTION!

Do not overtighten Torx fasteners. You can

strip the fasteners if they are overtightened.

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Jeep Gladiator 2021, Owner'S Manual, Page: 92 / 484

Search results

Summary of Contents for Gladiator 2021

Reviews: